| SHIELD | 1 | |
| TEMP | 2 | |
Speed/Water | TEMP0V/SPD0V | 3 | |
SPD | 4 | ||
Temp. | |||
+V | 5 | ||
Sensor | |||
| NC | 6 | |
|
| ||
| NC | 1 | |
| NC | 2 | |
| NC | 3 | |
| NC | 4 | |
Transducer | NC | 5 | |
NC | 6 | ||
| |||
| NC | 7 | |
| XDR+ | 8 | |
| XDR SHIELD | 9 | |
| XDR- | 10 |
4 TEMP
7 TEMP0V
3 TEMP0V/SHIELD
1SPD
2+12V
5NC
6NC
8XDR+
9
10 XDR-
Wiring for connection of speed/water temperature sensor with cable 02S4147
Ground
Connect the ground wire to the boat's grounding bus. If the unit is not grounded, noise may result. If noise is a problem on an FRP vessel, fasten a ground plate of 20 cm x 30 cm to the outside of the ship's hull and connect the ground wire there.
Use a 
) for the connection on the display unit. Do not use an
( 
).
21
