Furuno GP-7000F installation manual Primary, Secondary Unit C-link

3.8Primary, Secondary Unit (C-link)

The C-link feature, available when several GP-7000 series units are interconnected via NMEA ports or PC/NMEA IN ports (see the illustration below), lets you duplicate on secondary stations the destination set at the primary station. With this feature active destination may only be set from the primary station.

Primary station

GP-7000 NMEA1

seriesNMEA2

PC/NMEA IN

Secondary station

GP-7000 NMEA1

seriesNMEA2

PC/NMEA IN

Secondary station

GP-7000 NMEA1

seriesNMEA2

PC/NMEA IN

Secondary station

GP-7000 NMEA1

seriesNMEA2

PC/NMEA IN

*

*

*: Either port

**: Either port

**

**

Note: Secondary stations cannot be connected to one another.

1.Press the [MENU] key to show the menu bar.

2.Rotate the [ENTER] knob to choose ADVANCED from the menu bar and then push the [ENTER] knob.

3.Rotate the [ENTER] knob to choose INPUT/OUTPUT and then push the [ENTER] knob.

4.Rotate the [ENTER] knob to choose C-LINK and then push the [ENTER] knob.

Secondary Station

Primary Station

Off

5.Choose Off, Secondary Station, Primary Station as appropriate and then push the [ENTER] knob.

6.Press the [MENU] key to close the menu.

35