Mounting, Desktop, overhead mounting | Furuno GP-7000F specs

Mounting

Desktop, overhead mounting

1.Fix the hanger to the mounting location with four self-tapping screws (5x20). See the outline drawing on page D-1 for complete mounting dimensions.

2.Loosely screw the knob bolts into the display unit.

3.Set the display unit to the hanger and tighten the knob bolts.

4.Attach the hard cover to the display unit to protect the LCD.

FIXING HOLE

Unit: mm

Display unit, mounting dimensions for desktop or overhead mounting

2

Image 8

Furuno GP-7000F installation manual Mounting, Desktop, overhead mounting

Contents

Color GPS/PLOTTER/SOUNDER GP-7000F Iii 00014914012 Safety Instructions System Configuration Standard supply Name Type Code No Qty Remarks Optional equipment Name Type Code No Qty Display Unit Mounting considerations Mounting Desktop, overhead mounting Flush mounting Antenna Unit Remarks on installation TransducerInside-hull mounting Necessary tools Attaching the transducer Final preparationsCoating transducer face with silicone sealant Squeezing out air bubbles in adhesive Transducer mounting location Thru-hull mount transducer mounting dimensions millimetersThru-hull mounting Acceptable transducer mounting locations Suitable transducer mounting locations Transducer mounting Procedure for installing the thru-hull mount transducerConstruction of fairing block Installing the transom mount transducer on a flat hull Transom mount transducer Installing the transom mount transducer on a deep-V hull Transducer preparation Optional triducer Triducer 525ST-MSD Height required at mounting location Mounting location on single drive boat Installation template Sensor position and transom angle Vertical adjustment and cable routing Attaching the sensor to the bracketPage Optional Speed/Water Temperature Sensor ST-02MSB, ST-02PSB Speed/water temperature sensor ST-02MSB, ST-02PSB Wiring Power source Transducer Ground Connecting the antenna cable Antenna Code no Contents Cable setAntenna cable Types of antenna cables Waterproofing the connector How to attach N-P-8DFB connector for extension cable kit Part Type Code No Qty Remarks Optional transducerFabricating the transducer cable Adjustments Choosing Position Data Source INPUT/OUTPUT menu Choosing Port I/O Format Nmea 1 INPUT, Nmea 1 Output menusInput Description of Nmea options Output FormatInput data, sentence priority Port Format Data sentence Remarks Echo Sounder Settings Setting transducer model, output powerOutput Power Transducer Echo Sounder System Setup menu Echo Sounder menu Calibrating speed/water temperature sensor, setting draftSensor Setup menu Setting range Choosing Data Sources EXT Nmea menu Calibrating Nmea Depth, Speed and Water Temperature DataSetting range Waypoint, Route Format External Event Format Primary, Secondary Unit C-link ＰａｃｋｉｎｇＬｉｓｔ GP-7000/F-E-C-017,GP-7000/F-E-N-017 ＰａｃｋｉｎｇＬｉｓｔ GP-7000/F-E-C,GP-7000/F-E-N Page Page Hatai Mar,2707 R.Esumi Feb Page Page Page 指示部 Display Unit GP-7000F