Furuno GP-7000F Echo Sounder Settings, Setting transducer model, output power, Sounder Setup menu

3.3Echo Sounder Settings

Setting transducer model, output power

The GP-7000F is preset to use a 600 W transducer (520-5PSD, 525-5PWD, 520-5MSD). For a 1 kW transducer, follow the procedure below. Note that the optional Distributor MB-1000 and cable assy. 02S4089 are necessary in order to use a 1 kW transducer.

Output Power	Transducer
600 W	520-5PSD, 525-5PWD, 520-5MSD
1 kW	50B-6, 50B-6G, 200B-5, 200B-5S, 50/200-IT

1.Use the [DISP] key to choose an echo sounder display.

2.Press the [MENU] key to show the menu bar.

3.Rotate the [ENTER] knob to choose SOUNDER from the menu bar and then push the [ENTER] knob.

AUTO MODE PRESET	FISH
DISPLAY MODE	NORMAL
FREQUENCY	50 KHz
PICTURE ADVANCE	1/1
TEMPERATURE GRAPH	On
ZOOM MARKER	On
A-SCOPE	Off
SOUNDER SETUP
SENSOR SETUP

ECHO SOUNDER SYSTEM SETUP menu

4. Rotate the [ENTER] knob to choose SOUNDER SETUP and then push the [ENTER] knob.

TRANSMISSION	On
TRANSMISSION POWER	High
TRANSDUCER	600W
50 KHz TVG	00
200 KHz TVG	00
50 KHz ECHO OFFSET	+000
200 KHz ECHO OFFSET	+000
50 KHz BOTTOM LEVEL	+000
200 KHz BOTTOM LEVEL	+000
SMOOTHING	SM2
DEPTH INFORMATION	Large
PLAYBACK SOUNDER IMAGE	Off
ECHO SOUNDER SIMULATION	Off

SOUNDER SETUP menu

5. Rotate the [ENTER] knob to choose TRANSDUCER and then push the [ENTER] knob.

600W

1KW

6.Rotate the [ENTER] knob to choose 1KW and then push the [ENTER] knob.

7.Press the [MENU] key to close all open windows and erase the menu bar.

30