Furuno SC-110 manual 1.2Installing the Antenna Unit, Installation post

1. INSTALLATION

1.2Installing the Antenna Unit

Note: “Bird-repellent fixtures” may be attached to each antenna element and the center cover to prevent birds from alighting on them. If it is more convenient to attach them before fixing the antenna unit to the mounting location, do step 7 before fixing the antenna unit.

1. Prepare a post for the antenna as shown in the illustration below.

Recommended Flange

(Option)

Name: Flange

Type: OP20-31

Code No.: 004-378-230

Weld all the way around.

Post should be constructed from stainless steel and measure

4mm or larger in thickness. 3 mm or less

The width of welding should be within 3 mm from the mast so that the welding does not touch the spring washer.

φ15 Gasket

(supplied in installation materials)

BOW

φ60.5 mm

Installation post

1-4