Furuno SC-110 manual 1.6.2Choosing mounting method, 1-16, Main menu, Installation setup menu

1. INSTALLATION

1.6.2Choosing mounting method

1. Turn on the processor unit and then press the [MENU] key to show the menu.

MAIN MENU

	SATELLITE
ALARMS
MESSAGES	WAAS/DGPS
GPS SETUP	I/O SETUP
SYS SETUP	INST MENU
SOFT VER.	ERASE
OTHERS	TRIP MENU

Main menu

2.Use the Omnipad () to choose “INST MENU” and then press the [ENT] key.

INSTALLATION SETUP

MOUNTING : WALL

DIRECTION : A

LANGUAGE : ENG

ROLL OFFSET : 0.0

PITCH OFFSET : 0.0

Installation setup menu

3.“MOUNTING” is selected; press the [ENT] key.

4.Use the Omnipad to choose the mounting method: “FLOOR”, “WALL” or “INVERT” as appropriate.

5.Press the [ENT] key.

6.“DIRECTION” is selected; press the [ENT] key.

7.Use the Omnipad to choose mounting direction (“A ”, “B ”, “C” or “D”) as appropriate. Refer to section 1.3.

8.Press the [ENT] key.

1-16