Furuno SC-110 manual 2-18, AUTO/MANUAL options, Choose DPGS STATION and press the ENT key

2. OPERATION

2)Use the Omnipad to choose WAAS satellite search method, AUTO or MANUAL as appropriate. For MANUAL, press the [ENT] key, enter WAAS satellite number, referring to page AP-14 (7. What is WAAS?) and then press the [ENT] key.

3)CORRECTIONS DATA SET is selected; press the [ENT] key. CORRECTIONS DATA SET determines how to use the WAAS signal. Use the default setting “00”. Do step 6 and 7 for DGPS.

6.Choose DPGS STATION and press the [ENT] key.

AUTO

MANUAL

AUTO/MANUAL options

7.Choose MANUAL or AUTO as appropriate and press the [ENT] key. For AUTO got to step 8. For MANUAL do the following:

1)RATE is selected; press the [ENT] key.

50BPS

100BPS

200BPS

Baud rate options

2)Choose appropriate baud rate and press the [ENT] key.

3)FREQ is selected; press the [ENT] key.

4)The cursor is selecting the hundredths digit so press ▲ or▼ to display appropriate digit. Press ► to shift the cursor to the tenths place.

5)Set other digits appropriately.

8.Press the [DISP] key to close the menu.

2-18