Furuno SC-110 manual 1.7.2Fabrication of cables, 1-18, Cable, Sectional view, fabrication

1. INSTALLATION

1.7.2Fabrication of cables

Cable	Sectional view, fabrication
Power cable		50	50
DPCY-1.5		Sheath	Armor
(or equivalent)	Armor

Sheath

φ	= 11.7 mm			Cut the sheath.
			15
	Conductor	6
	S = 1.5 mm 2
	φ = 1.56 mm
	SECTIONAL VIEW	Crimp-on lug	Vinyl tape	Lay in clamp
		FV1.25-5		where paint
		FABRICATION		was removed.
Cable for IEC 61162	Armor	80		50
format equipment (JIS
cable TTYCS-1 or	Sheath	Shield		Remove paint
equivalent)				by 50 mm.
	Shield		Cut vinyl sheath.
φ
	= 10.1 mm Conductor
Cable for AD-10	S = 0.75 mm2
format equipment	φ = 1.11 mm
	SECTIONAL VIEW (TTYCS-1)		shield onto cable.
((JIS cable TTYCS-1Q
			Expose core and fold back
or equivalent)			Vinyl tape

Armor

15 45

6

Sheath

φ	Shield	Lay in clamp
	= 11.3 mm	where paint
	Conductor	was removed.
	S = 0.75 mm2

φ= 1.11 mm

SECTIONAL VIEW (TTYCS-1Q) FABRICATION

Note 1: Attach labels (supplied) to cables to differentiate between them.

Note 2: A plastic sheet is placed across the cable glands of the processor unit to keep out foreign material. Cut out holes in the plastic where cables are to be lead in.

1-18