Furuno SC-110 manual 400p/nm, 2.8.2Log pulse, 2-13, Log pulse options, 200p/nm

2. OPERATION

2.8.2Log pulse

This equipment provides SOG (speed over ground) in high accuracy. It converts an SOG value to a pulse signal and outputs at the rate of 200 or 400 pulses/nm.

1.Press the [MENU] key.

2.Choose I/O SETUP and then press the [ENT] key.

3.Choose LOG PULSE and then press the [ENT] key.

200p/nm

400p/nm

Log pulse options

4.Choose 200p/nm or 400p/nm as appropriate and then press the [ENT] key.

5.Press the [DISP] key to close the menu.

2-13