PROBLEM | PROBABLE CAUSE | CORRECTIVE MEASURES |
4) Unusually high body fat readings | a) Too much light present during the | a) Do not lift the Light Wand from the |
reading. | subject's biceps until a "2" appears | |
|
| on the screen during the first |
|
| measurement or the printer starts |
|
| printing after the second |
|
| measurement. |
|
| b) Use the Light Shield to block the |
|
| external light. Always avoid |
|
| measurements under strong lights |
|
| (e.g. direct sunlight) because errors |
|
| may occur. |
5) Printer Stops | a) Low batteries. | a) Replace batteries (see page 3). |
| b) Bad battery contact. | b) Remove batteries and clean tabs |
|
| with isopropyl alcohol (rubbing |
| c) Bad AC connection. | alcohol). |
|
| c) Unplug the AC Adapter from the |
|
| wall socket and from the unit. Clean |
|
| the adapter contact with isopropyl |
|
| alcohol (rubbing alcohol). |
33
