Gaggenau CK 481-6 manual Timer operation

Timer operation

Programming a switch-off time

Note: only ever operate the appliance under supervision.

It is possible to program an automatic switch-off time for one or several of the cooking zones. Any value between 1 and 90 minutes can be entered on the timer.

It is also possible to use the timer independently. The timer can also be used when the cooktop is switched off.

Programming a switch-off time

•Set the cooking zone which you want to time to the required cooking level.

•Touch the timer symbol. The timer display flashes 00. Select the required time using the UP-/DOWN-symbols.

•The value is confirmed a few seconds later by an audible signal and the timer starts. Alternatively you can confirm the values by again touching the timer symbol in the control panel.

•Touch the cooking zone in the display panel which you would like to timer operate. The display flashes the selected cooking level. Touch the timer symbol.

•A spot appears next to the cooking level on the cooking zone display. The timer is now set for this cooking zone.

•After the elapse of the programmed time an audible signal is sounded. The selected cooking zone is switched off. Both the selected cooking value and the timer flash. By touching any symbol on the display the audible signal is switched off and the cooking zone display shows zero.

17