6. Options menu
Using the options menu, the automatic
Use the symbols UP and DOWN to access the options menu and chose the required values.
Use the symbol timer to store the required value.
Use the symbol + to go through the options menu.
| Use the main switch symbol to exit the options |
| menu at any time. Values which have not been |
| confirmed will not be stored. |
| Note: the options menu will automatically end |
| without storing any values, should you stop |
Options menu, | operating it for more than 2 minutes. |
| |
setting the automatic |
|
| Options menu, setting the automatic |
| |
| Proceed as follows: |
| • Switch on the appliance by touching the main |
| switch. (Note: the timer should not be activated |
| and all cooking zones should be on 0.) |
| • Touch symbols UP and DOWN when the cooktop |
| is switched on. You will hear a signal. Keep your |
| fingers pressed down until a second signal sounds |
| after a few seconds and P1 lights on the timer |
| display panel. Remove fingers immediately. A 04 |
| appears on the cooking zone display panel, i.e. a |
| quick boil time of 4 minutes is stored. |
| • You can now touch symbols UP or DOWN and |
| select a quick boil time from 1 to 15 minutes. The |
| selected quick boil time applies to all cooking |
| zones. The selected time (A 01 to A15) is shown |
| on the cooking zone display panel and P1 flashes |
| (requesting to store values). |
| • Store the required option by touching the timer |
| symbol. You will hear a signal and P1 lights |
| constantly. |
| In order to exit the options menu touch the main |
| switch. Values which have not been confirmed will |
| not be stored. |
| Should you require to program further functions, |
| touch the symbol +. |
20 |
|
