Timer operation
Programming the timer without |
cooking zone |
Changing or erasing a given time value
•Touch the timer symbol.
•You can now change the programmed time using the
Programming the timer without cooking zone
It is also possible to use the timer independently from the cooking zones and without
Any value between 1 and 90 minutes can be entered on the timer.
•Touch the timer symbol. The timer display flashes 00. Select the required time using the
•The value is confirmed a few seconds later by an audible signal and the timer starts. Alternatively you can confirm the values by again touching the timer symbol in the control panel.
•The timer display shows the elapsed time.
•After the elapse of the programmed time an audible signal is sounded. The timer display flashes. By touching any symbol on the display the audible signal is switched off.
•The timer can be switched off at any time by touching the timer symbol and then the
18