Operating for the first time
Remove the packaging from the appliance and dispose of it according to local regulations. Be careful to remove all accessories from the packaging. Keep packaging elements and plastic bags away from children.
Check the appliance for transport damage before installing it.
The appliance must be installed and connected by an authorised specialist before operation. Before operating the appliance for the first time, make sure that the mains connection is in proper working order.
The serial number of the appliance can be found on the quality control slip which is included with these instructions. This quality control slip should be kept, for guarantee reasons, together with your operating and assembly instructions.
Read through these instructions attentively before operating your appliance for the first time.
Thoroughly clean the appliance and accessories before using them for the first time. This will eliminate any 'newness' smells and soiling (see chapter “Cleaning and care”).
Tip: if you have a glass insurance, we recommend that you have your new
About use
The appliance is intended solely for household use and must not be put to any other uses.
Use the appliance to prepare meals only. Do not use the appliance to heat up the room in which it is installed.
Do not use the cooking surface as space to store items. Do not place any hot pots on the display panel.
Place a cooking vessel on the corresponding cooking zone before operating it. Do not remove the cooking vessel until you have switched off the hotplate. The size of pots and pans should corres- pond to the size of the hotplate. This will save you energy and time.
Switch off the cooktop after use.
Iridiscent discoloration can be caused by the bases of some pots. These do not interfere with the operation of the glass ceramic cooktop.
Always keep the cooking area and control panel dry and clean. The surface can be scratched due to dirt (e.g. sand grains).
Never heat food in aluminium or plastic containers as the material can melt and damage your cooktop.
If installed above a pyrolytic oven, the overheating protection may be triggered when the cooktop is operated during a pyrolytic cleaning cycle.
In the event of malfunction, first check your household fuses. If the power supply is in proper working order, but the appliance is still not functioning, please inform your specialist dealer or your nearest Gaggenau
6
