7. Maintenance
7.1 General
7.2 Replacing the lamp
Fig. 42
Fig. 43
The appliance must always be disconnected from the mains when being repaired.
If the appliance does not function correctly, check the fuses first.
If the power supply is functioning correctly, but your appliance still does not work, please contact your dealer or your local Gaggenau customer service agency. Specify the appliance type (see rating plate).
Repairs may only be carried out by authorised electricians, in order to guarantee the safety of the appliance.
Unauthorised tampering with the appliance will invalidate any warranty claims.
You can obtain spare lamps from Gaggenau Customer Service or a dealer. We recommend that you use these lamps only. (Order number 157312) Proceed as follows:
–Disconnect fuses.
–Remove one of the lamp cover screws.
–Swivel the cover to the side.
Caution: the lamp cover may still be hot.
–Push the lamp to the side by about
–Insert the lamp in the reverse order. Swivel the cover back to its original position and screw it on. (Caution: secure the seal properly!)
Note: do not touch the halogen lamp with your hands. Use a cloth and only touch the edges of the lamp.
31
