Gaggia Machine Baby Dosata manual Description of parts, Instructions for the power supply cord

Description of parts:

FIG. 01

1Main switch

2Coffee dispensing button

3 Coffee dispensing button

4 Hot water button/pump

5 Steam button

6 Doses programming button/manual operation

7 Steam/hot water knob

8 Turbo frother steam nozzle (removeable)

9 Filterholder

10 1 cup filter (or coffee pod)

11 2 cup filter

12 Drip tray

13 “Perfect crema” device

14 Brewing head

15 Filterholder gasket

16 Shower disc holder

17 Shower disc

18 Tamper

19 Power cable and plug

20 Measuring spoon

21 Delivery spout

22 Tank cover

23 Removable decompression duct

24 Milk frother (removeable)

25 Drip plate

26 Removable water tank

Instructions for the power supply cord

AA short power-supply cord is provided to reduce risks of getting tangled up or tripping over a longer cord.

BLonger extension cords are available and may be used if care is exercised in their use.

CIf a long extension cord is used:

1the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance.

2if the appliance is of the grounded type, the extension cord should be a grounding type

3the cable does not hang from the table to avoid the risk of getting caught up in it.

ENGLISH

Preparation:

1.Remove the water tank cover (22) and fill with cold water to the MAX line indicated on tank (26). See FIG. 2.

The water tank can also be removed after disconnecting the decompression duct (23) and removing the drip plate (25).

IMPORTANT: Once the tank has been reinserted, ensure that the silicon pipes are inside the actual tank and not tangled or blocked.

Re-install the decompression duct (23).

2.Insert plug (19) into a suitable wall outlet (see point 1 under “Caution”).

3Press main switch (1). The starting pilot light will light up and the symbols of the different buttons will alternatively light up.

Make sure that buttons 2 - 3 - 4 and 5 are off (not pressed)

Starting up

This procedure fills the water boiler with fresh water.

This should be done whenever the machine is switched on.

This machine, featuring a pump to brew coffee, is equipped with a self-priming system.

3Place an empty cup under steam rod (8), turn steam knob (7) and press (keeping pressed) hot water button (4).

You will hear the noise of the enabled pump and after a few seconds water will come down from steam rod (8).

When the cup is filled release hot water button

(4) and close steam knob (7).

The Gaggia machine is now ready to be used.

Another feature of the machine is the “no-drip system”, eliminating most of dripping from brewing head (14).

• 9 •