Training Settings
note: Training settings cannot be modified during an active session in Train mode.
1.On the Train page, press and hold start/stop.
2.Press view to advance to the next setting. The following settings can be modified:
•UNITS–change units to miles or kilometers.
•PACE SHOW–display pace in minutes per mile/ kilometer.
OR
SPEED SHOW–display speed in miles/kilometers per hour.
Train Mode
•AUTO–turn Auto Lap® on or off. When AUTO lap is ON, laps are triggered by distance; you cannot use the lap button to manually mark laps Press view again to enter the distance.
•ZONES–turn the training zones on or off. See Training Zones.
•PUSH CALIB–calibrate the foot pod by running a known distance, see page 8.
•TxPAIR–seepage 18.
•CALIB–enter a calibration factor to adjust foot pod calibration to a known value. See page 8.
•WHEEL–enter the wheel circumference in mm (GSC 10 required).
