Train Mode

Computer Pairing

Computer pairing is the setting in which the Forerunner automatically detects and pairs additional computers with a USB ANT stick.

To pair your Forerunner with a new computer:

1.Verify that the computer is set up for data upload. See the requirements on page 24.

2.On the Train page, press and hold start/stop.

3.Press view to advance to the TxPAIR setting.

4.Press + to turn on computer pairing. Your computer detects the Forerunner and requests to pair.

5.Press view.

6.Press +. The FOUND Comp confirmation message appears.

After you have paired with your primary computer, turn computer pairing off to avoid disruptive messages on the Forerunner and nearby computers.

To turn off computer pairing:

1.On the Train page, press and hold start/stop.

2.Press view to advance to the TxPAIR setting.

3.Press - to turn off computer pairing.

18

Forerunner 50 Owner’s Manual