Understanding the Power-On Self-Test

When you turn on your computer, the Power-On Self-Test (POST) routine checks the computer memory and components. To see this information on the screen, press TAB during POST.

Important The computer starts very quickly. If your monitor requires time to warm up, you may not see the messages. If you are having problems, you may need to wait for the monitor to warm up and then restart the computer. If you are trying to enter Setup, press F1 before the monitor warms up.

The computer displays error messages if POST finds any problems. Write down any error messages that you see. If you continue to have problems, these error messages may help Gateway Technical Support diagnose the cause.

Setting up the operating system

The first time you start your computer, the operating system takes a few minutes to set up.

Refer to your operating system documentation for specific questions regarding the operating system.

To complete the operating system setup:

1After the computer starts, the start-up wizard opens. Continue by clicking

Next.

2Type the requested information in the appropriate text boxes. When you have finished typing the information, continue by clicking Next.

Important Any ID or key numbers requested to complete the operating system setup are either on a sticker attached to the computer or in the documentation provided.

Starting your computer

11