
To install the new processor:
1Hold the new processor over the empty processor socket and make sure that pin 1 on both the processor and the socket are aligned. Pin 1 is near the cut out corner.
2Gently place the new processor into the socket.
Heat sink
Pin 1 | Processor |
|
Locking lever
3Secure the processor by lowering the locking lever until the lever latches into place. The processor will slip into place without pressure when aligned correctly.
To replace the heat sink:
1Replace the heat sink by hooking the metal clip on the heat sink to the tabs on the processor socket. Make sure the heat sink is level with the processor and the metal clips are securely attached.
2Close the case (see “Closing the case” on page 23).
3Reconnect the power cord and all other cords you removed, then turn on the system.
Replacing or adding a processor | 61 |