
Memory/processor problems
Memory errors were detected during system start up.
Probable Cause | Solution |
|
|
Memory was added or | Enter the BIOS Setup utility and save the new |
removed, and the new | memory configuration. |
configuration was not saved |
|
in the BIOS Setup utility. |
|
|
|
The memory was installed | Check the memory for proper seating and |
incorrectly. | orientation. Reseat if necessary. |
|
|
A memory chip is faulty. | Replace the card on which the faulty chip |
| resides. |
| help determine which chip or memory segment |
| is failing. |
|
|
A new processor is not recognized by the system.
Probable Cause | Solution |
|
|
The processor was installed | Check the installation. Make sure the |
incorrectly. | processor is fully seated in its socket. Reseat |
| if necessary. The processor should be |
| recognized automatically if it was installed |
| correctly. |
|
|
The processor speed was not | If your system BIOS lets you select the |
set correctly in the BIOS | processor speed, make sure you have |
Setup utility configuration | selected the correct speed. |
mode. |
|
|
|
86Troubleshooting