Gateway FHD2400H manual Connecting the monitor, Attaching the stand, Connecting video inputs, Tip

Using Your Gateway Flat-Panel Monitor

Connecting the monitor

To set up the monitor, first attach the base, then make your cable connections.

Attaching the stand

To attach the stand:

1Place the monitor face-down on a soft, non-marring surface. A non-slip mat on a tabletop is ideal.

2Remove the four thumbscrews that are attached to the back of the monitor.

Thumbscrew	Thumbscrew
Thumbscrew	Thumbscrew

3Lay the stand on the monitor so the thumbscrew holes line up with the holes in the stand.

4Replace the thumbscrews.

5Test the bracket connection to make sure it is secure, then place the monitor upright.

Connecting video inputs

To connect video sources to your monitor:

Tip

Rotate the screen 90° to make it easier to connect the cables.

1Position your computer and the monitor so you can reach the back of each.

2Make sure that you computer is turned off.

2