GE 164D2966P126 warranty OPEW’l”ING THE SELF-CLEANING OVEN, After Self-Cleaning, Quick Reminder

Models: 164D2966P126

1 40
Download 40 pages 36.68 Kb
Page 32
Image 32
OPEW’l”ING THE SELF-CLEANING OVEN

OPEW’l”ING THE SELF-CLEANING OVEN

(Lolltlnlled)

After Self-Cleaning

You may notice some white ash in the oven. Just wipe it up with a damp cloth after the oven cools.

If’ white spots remain, remove them with a soap- filled steel wool pad. Be sure to rinse thoroughly with a vinegar and water mixture. These deposits are usually a salt residue that cannot be removed by the

clean cycle.

If the oven is not clean after one clean cycle. repeat the cycle.

If the shel\es ha\e become hard to slide, wipe the she]f supports with cooking oil.

NOTE: No functions can be programmed before the

dt,ol ..llonlatically Lm]ocks.

How to Set Delay Start of Cleaning

Quick Reminder:

1.Press the AUTO SELF CLEAN pad.

2.Press the INCREASE or DECREASE pad until the desired Clean Time appears.

3.Press the STOP TIME pad.

4.Press the INCREASE or DECREASE pad until the desired Stop Time appears in the display.

Delay Start is setting the oven timer to start the cleatl cycle automatically at a later time than the present time of day.

NOTE: Before beginning, make sure the o\en ciock shows the correct time of day.

1.FOI1OW the directions in the Before a Clean Cycle section.

4. Press the STOP TIME pad.

“SET STOP TIM E.. and the earliest Stop Time you can set will appear in the display.

“rhc earliest Stop Time will be the Clean Time sclcctcd p]LIs the time of day. l~or example: If the Clean Time is 3 hours and the time of day

is ():()(). the Stop Time that appears in the display will be 9:()().

5.Press the INCREASE pad to change the Stop Time to a later time of day if desired. For example: If yOLI set the —

@Stop Time at 11 :()(), [he oven will start

(a

the clean cycle at 8:00 and end at

11 :()(). The door latches automatically.

The self-clean cycle will automatically begin after “CLEAN” is displayed and the time for the clean

AUTO SELF

CLEAN

nA

AQ

2.After closing the door, press the AUTO SELF CLEAN pad.

3.Press the INCREASE or DECREASE pad to enter the Clean Time.

cyc]e is set. The words “ON” and “LOCK” will appear in the display when the door automatically locks. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCK light goes oft.

6. When the LOCK light is off, open the door.

NOTE:

During a delayed self-clean operation you can find

out when the oven is set to turn on by pressin& and holding the AUTO SELF CLEAN pad for 3 seconds.

A fan may automatically turn on and off to cool internal parts. This is normal and the fan may continue to run even after the oven is turned off.

32

Page 32
Image 32
GE 164D2966P126 OPEW’l”ING THE SELF-CLEANING OVEN, After Self-Cleaning, How to Set Delay Start of Cleaning, Quick Reminder