Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

Use this appliance only for its intended purpose as described in this Owner’s Manual.

SAFETY PRECAUTIONS

When using electrical appliances, basic safetyprecautions should be followed, including the following:

Operating Instructions

Installation

Instructions

■This refrigerator must be properlyinstalled and located in accordance with the Installation Instructions before it is used.

■Do not allowchildren to climb,stand or hang on the shelves in the refrigerator.They could damagethe refrigerator and seriously injure themselves.

■Do not touch the cold surfacesin the freezer compartment when handsare dampor wet. Skin may stick to these extremely cold surfaces.

■Do not store or use gasoline or otherflammable vapors and liquids in the vicinity of this or any other appliance.

■Keep fingers out of the “pinchpoint” areas; clearances between the doors and between the doors and cabinet are necessarily small. Be careful closing doors when children are in the area.

■In refrigerators with automatic icemakers, avoid contact with the moving parts of the ejector mechanism, or with the heating element that releases the cubes. Do not place fingers or hands on the automatic icemaking mechanism while the refrigerator is plugged in.

■Unplug the refrigerator before cleaning and making repairs.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

■Setting either or both controls to 0 (off) does not remove power to the light circuit.

■Do not refreeze frozen foods which have thawed completely.

Consumer Support Troubleshooting Tips

DANGER! RISK OF CHILD ENTRAPMENT

PROPER DISPOSAL OF THE REFRIGERATOR

Childentrapment and suffocation are not problems of Refrigerants the past. Junked or abandoned refrigerators are still

dangerous…even if they will sit for “just a few days.”

All refrigeration products contain refrigerants,

which under federal law must be removed prior

If you are getting rid of your old refrigerator,please

to product disposal. If you are getting rid of an

followthe instructions below to help prevent

old refrigeration product, check with the company

accidents.

handling the disposal about what to do.

Before You Throw Away Your Old

 

Refrigerator or Freezer:

 

■Take off the doors.

■Leave the shelvesin placeso thatchildrenmay not easilyclimb inside.

USE OF EXTENSION CORDS

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an extension cord.

However, if you must use an extension cord, it is absolutely necessary that it be a UL-listed (in the United States) or a CSA certified (in Canada), 3-wiregrounding type appliance extension cord havinga groundingtype plug

2and outlet and that the electricalrating of the cord be 15 amperes (minimum) and 120 volts.

Page 1 Page 3
Page 2
Image 2
GE 200D9366P016 Operating Instructions Installation, Consumer Support Troubleshooting Tips, Before You Throw Away Your Old
Page 1 Page 3

200D9366P016 specifications

The GE 200D9366P016 is a notable component within General Electric's (GE) expansive portfolio, particularly recognized for its application in industrial environments requiring robust and reliable performance. This function-oriented device is often employed in various sectors, including power generation, oil and gas, and manufacturing, where operational efficiency and precision are paramount.

One of the primary features of the GE 200D9366P016 is its exceptional durability. Constructed to withstand harsh operating conditions, it is engineered with high-quality materials that resist wear and tear. This durability not only extends the lifespan of the component but also reduces maintenance needs, allowing for longer intervals between service checks, thus saving both time and money for users.

The GE 200D9366P016 incorporates advanced technologies designed to enhance efficiency. It is often embedded with smart sensing capabilities that facilitate real-time monitoring of operational parameters. This feature enables users to track performance metrics, detect potential failures before they escalate, and optimize operational workflows.

In addition to its advanced sensing technologies, the GE 200D9366P016 is designed for seamless integration with a wide range of industrial systems. This interoperability is crucial for facilities that utilize various GE products or require compatibility with third-party systems. The component's design ensures that it can be easily adapted to different configurations, thereby enabling users to customize solutions based on specific operational requirements.

The product’s user-friendly interface is another significant characteristic, allowing operators to easily interact with the device and access critical data and controls. Clear displays, coupled with intuitive controls, enable quick and efficient operation, minimizing the learning curve for new users.

Moreover, the GE 200D9366P016 is backed by extensive technical support and documentation from GE, enhancing user confidence in installation and operation. Clients benefit from a wealth of resources, including troubleshooting guides and user manuals, ensuring that they can maximize the utility of the component.

Overall, the GE 200D9366P016 stands out for its robust construction, advanced technological integration, seamless compatibility, and user-centric design, making it a preferred choice for industries that prioritize reliability and efficiency in their operations.
Top Page Image Contents