To erase all messages from the base:
1.Press the PLAY/STOP. The message plays.
2.Press and hold the delete button. ERASE ALL MESSAGES? shows in the display.
3.Press the YES soft key to confirm the deletion. ALL MESSAGES ERASED shows in the display.
To erase a message from the handset:
1.Press the MENU soft key on the handset.
2.Use the 5 or 6 buttons to scroll to MESSAGES.
3.Press the SELECT soft key to confirm. MAILBOX 1 (XX) MAILBOX 2 (XX) shows in display, where XX is the number of the new messages in the mail box.
4.Use the 5 or 6 buttons to select the desired mailbox.
5.Press the SELECT soft key to confirm. ANSWERER REMOTE ACCESS shows in display.
6.Press the PLAY/STOP on the handset (the 2 button). The message plays.
7.Press the ERASE (the 0 button) to erase the message during message playback.
Leaving a Memo
Base Unit
1.Press and hold the memo/msg fwd button on the base. You must hold the button until you finish recording the memo.
2.Begin speaking after you hear the beep.
3.Release the memo/msg fwd button when finished.
NOTE: Message will default record in Mailbox 1.
Cordless Handset
1.Press MENU soft key on the handset.
2.Use the 5 or 6 buttons to scroll to MESSAGES.
3.Press the SELECT soft key to confirm. MAILBOX 1 (XX) MAILBOX 2 (XX) shows in display, where XX is the number of the new messages in the mail box.
4.Use the 5 or 6 buttons to select the desired mailbox which you want to leave the message.
5.Press the SELECT soft key to confirm. ANSWERER REMOTE ACCESS shows in display.
6.Press the MEMO on the handset (the 5 button) to start.
7.Begin speaking when RECORDING MEMO shows in the display.
8.Press the END soft key when finished.
NOTE: Make sure the END soft key is pressed after finished recording memo or it will not be recorded in the mailbox.
42
