Hold

Press the HOLD soft key to put a call on hold. LX ON HOLD shows in the display, where X is the line number.

To take a call off hold, press the UNHOLD soft key.

To switch a call on hold from the base to the cordless handset, press the TALK/LINE1/ flash1, TALK/LINE2/flash2 or handsfree button on the handset.

Paging the Cordless Handset

This feature helps you locate a misplaced handset.

Press and release the page button on the base. The cordless handset beeps intermittently and displays PAGING FROM BASE for about two minutes or until you press OK soft key on the handset or press page on the base.

NOTE: You may still page the cordless handset even if the ringer is turned off.

Global De-registration

If one or more handsets become lost, you should de-register all handsets to ensure proper system operation. Follow the steps below to de-register all handsets at the same time.

WARNING: It is not recommended that a handset be de-registered unless absolutely necessary because once a handset is de-registered, that handset’s telephone features cannot be used until the handset is re-registered.

1.Press and hold the page button on the base until the CHARGE/IN USE indicator on the base flashes.

2.Press and hold the page button on the base again until the CHARGE/IN USE indicator on the base flashes rapidly.

3.Press and release the page button on the base once. All handsets are de-registered and PLEASE REGISTER shows in the handsets' display.

Room Monitor

Room monitoring may by done from the base or the handset. Begin with unit you want to monitor with (the microphone);

1.Make sure your phone is OFF (not in talk mode).

2.Press the MENU soft key to go to the main menu.

3.Use the 5 or 6 buttons to scroll to ROOM MONITOR.

4.Press the SELECT soft key to confirm.

27

Page 27
Image 27
GE 25865 manual Hold, Paging the Cordless Handset, Global De-registration, Room Monitor