Display Messages, Delete Call ID? | GE 25865 manual

Display Messages

The following indicators show the status of a message or of the unit.

BLOCKED CALL/ The person is calling from a name or number that has been

BLOCKED NAME/ blocked from transmission.

BLOCKED NUMBER

BUSY	Indicates the system is busy and not able to connect to the
	system.
CALL WAITING	Indicates a call is waiting on the line.
DELETE ALL?	Prompt asking if you want to erase all Caller ID records.
DELETE CALL ID?	Prompt asking if you want to erase the current Caller ID record
	that is shown on the display.
DELETED	Prompt confirming the Caller ID record is erased.
ENTER NAME	Prompt telling you to enter the name in one of the 10 memory
	locations.
ENTER TEL NUMBR	Prompt telling you to enter a telephone number in one of the 10
	memory locations.
INCOMPLETE DATA	Caller information has been interrupted during transmission or the
	phone line is excessively noisy.
LOW BATTERY	Indicates the battery pack needs charged.
NEW	Indicates call or calls have not been reviewed.
NO CALLS	Indicates no calls have been received.
NO DATA	No Caller ID information was received.
PAGING	The page button on the base has been pressed.
PRESS TALK KEY	Indicates the CID number is a Direct Dial Number (DDN) and
	cannot be formatted.
REPT	Repeat call message. Indicates that a new call from the same
	number was received more than once.
UNKNOWN CALL	The incoming call is from an area not serviced by Caller ID or the
NAME/NUMBER	information was not sent.

45

Image 45

GE 25865 manual Display Messages, Delete Call ID?

Contents

Page Notification to the Local Telephone Company Equipment Approval Information Hearing Aid Compatibility HAC Interference InformationLicensing FCC RF Radiation Exposure Statement Table of Contents Global De-registration Base Unit Introduction Parts ChecklistBefore You Begin Telephone Jack Requirements Installation Important Installation GuidelinesDigital Security System Handset Layout Base Layout Installing the Phone Installing the Handset BatteryBattery Pack Black wire Installing the Backup Batteries on Base Unit Installing the Base StationConnecting the Base Station Wall Mounting the Base Speakerphone Volume Base Speakerphone Set UpUsing the Soft Keys Turning the Answerers On or Off Base Voice/Display Prompt Language Base NameBase Date/Time Tone/Pulse Base Set Local Area Codes Base Ringer VolumeBase Ringers From the Ringer Menu Base Ringer Tone Base VIP Melody ToneBase Key Tone From the Answerer Setup Menu Answerer SetupOutgoing Announcement Reviewing the Outgoing Announcement Base Ring To Answer Setting the Security CodeChanging the Outgoing Announcement Sample Outgoing Announcement Forwarding Messages Set Forwarding MessagesForwarding Messages ON/OFF Recording Quality Handset Telephone Set UpView Unit ID Number of Retries Handset Ringer Volume Handset Display Prompt LanguageHandset Ringers Handset Ringer Tone Handset VIP MelodyHandset Key Tone Handset Registration Handset NameHandset Date/Time Handset Setting Local Area Codes Basic Operation Charge/In Use IndicatorAnswering a Call Making a Call Flash VolumeNumber Redial Mute Paging the Cordless Handset HoldGlobal De-registration Room Monitor Call Transfer Intercom Operation Making an Intercom CallReceiving an Intercom Call Using Intercom with External Telephone Calls Advanced Intercom FeaturesReceiving an Incoming Call During an Intercom Call Two-Way Intercom Calls Transferring External Call to Other Handset or Base Caller ID CID Call Waiting Caller IDReceiving CID Records Storing CID Records In CID Memory Reviewing Call RecordsDialing a Caller ID Number Number of digits Explanation Example Storing CID Records in Internal Memory Press the 6 button to scroll to Enter Number Deleting CID Records Memory Storing a Name and Number in MemoryStoring the Last Number Dialed Inserting a Pause in the Dialing Sequence Reviewing a Stored NumberChanging a Stored Number Dialing a Number from Memory Deleting Records Stored in Memory Chain Dialing from Memory Transferring MemoryTransferring memory from the base to a handset Transferring memory from the handset to the base Answering System Operation Handset Messages IndicatorScreening Calls from the Base Message Playback Erasing Messages Memory FullHandset To erase one message at a time from the base Leaving a Memo To erase all messages from the baseTo erase a message from the handset Connecting the Belt Clip Remote AccessConnecting an Optional Headset to the Handset Belt Clip and Optional Headset Battery Safety Precautions Changing the Battery Delete Call ID? Display Messages Troubleshooting Guide Handset Sound SignalsCaller ID Solutions Telephone Solutions Battery Solutions Accessory Information General Product CareCauses of Poor Reception Limited Warranty Service If you purchased your product outside the USA Index Global De-registration Outgoing Announcement Parts Checklist Thomson Inc