RINGS TO ANSWER
NOTE: This setting may only be made with the base.
You may set the number of times you want the phone to ring before the answering system answers a call.
1.Press the program/flash button until RING TO ANSWER shows in the display. “5” is the default setting.
2.Use the caller ID (rev or skip) button to scroll to 3, 5 or TOLL.
NOTE: TOLL (Toll Saver) can save you the cost of a toll call when accessing your messages from another phone. If you have new messages, the unit answers after the 3rd ring. If you have no new messages, the unit answers after the 5th ring. You can hang up after the 3rd or 4th ring and save the pay telephone or long distance charge.
3.Press program/flash again to store your selection. You will hear a confirmation tone.
SECURITY CODE
NOTE: This setting may only be made with the base.
You can access the answering system from any tone dialing telephone in another location. The security code is required for remote access, and it prevents unauthorized access to your answering system. You may only change the security code at the base.
1.Press the program/flash button until SECURITY CODE shows in the display.
2.Use the
NOTE: If you make a mistake, use the delete button to backspace and erase the wrong digit.
3.Press program/flash again to store your selection. You will hear a confirmation tone.
14
