GE 00004228, 25880 - page 44

44

• Did the handset beep when you pressed the talk/end/call back button?

The battery may need to be charged.

• Place handset in charge cradle for at least 20 seconds.

Dial tone is OK, but can’t dial out

• Make sure the TONE/PULSE setting on the base is set to the type of

phone service you are subscribed to.

Handset/Base does not ring

• Make sure the handset ringer switch is turned on and the base ringer is

programmed to HI.

• The cordless handset may be out of range. Move closer to the base.

• You may have too many extension phones on your line. Try unplugging

some phones.

• Check for dial tone. If no dial tone is heard, see No dial tone above.

You experience static, noise, or fading in and out

• Change channels.

• The cordless handset may be out of range of the base. Move closer to

the base.

• Move closer to base (cordless handset might be out of range).

• Make sure base is not plugged into an outlet with another household

appliance.

• Charge the battery.

Unit beeps

• Place the handset in the cradle for 20 seconds. If it still beeps, charge

battery for 16 hours.

• Clean charging contacts on cordless handset and charge cradle with a

soft cloth, remove comma or an eraser.

• See solutions for “No dial tone” on previous page.

• Replace the battery.

Contents

Main E QUIPMENT A PPROVAL I I NTERFERENCE I L CAUTION: HEARING AID COMPATIBILITY (HAC) TABLE OF CONTENTS Page I Page H ANDSET AND C HARGE C RADLE L B ASE L B EFORE Y OU B PARTS CHECKLIST TELEPHONE JACK REQUIREMENTS I MPORTANT I NSTALLATION I IMPORTANT INSTALLATION GUIDELINES I NSTALLING THE H ANDSET B I NSTALLING THE P CONNECTING THE AC (ELECTRICAL) POWER CONNECTING THE TELEPHONE LINE CONNECTING THE CORDED HANDSET WALL MOUNTING THE BASE T ELEPHONE S ET U L 1ENG 2FRA 3ESP 1 SET CONTRAST 1ENG RINGS TO ANSWER RING TO ANSWER 123 SECURITY CODE TOLL RINGER LEVEL SET RING LEVEL SET DAY 1 SET RINGER TONE LOCAL AREA CODE REGISTRATION (LINK CORDLESS HANDSET) LINK BASE? NO NO B ASIC O ANSWERING A CALL B ASE S MAKING A CALL S MANUAL CHANNEL SELECTION CALL TIMER AUTO STANDBY RINGER VOLUME CONTROL H B ASE U LAST NUMBER REDIAL B ASE S H PAGING THE CORDLESS HANDSET PAGING HANDSET PAGING FRM BASE MUTE ON M V S ANSWERING SYSTEM SPEAKERPHONE OPERATION RECEIVING A CALL WITH SPEAKERPHONE MAKING A CALL WITH SPEAKERPHONE SWITCHING BETWEEN SPEAKERPHONE AND HANDSET INTERCOM OPERATION MAKING AN INTERCOM CALL ANSWERING AN INTERCOM CALL RECEIVING AN INCOMING TELEPHONE CALL DURING AN INTERCOM CALL USING INTERCOM WITH A TELEPHONE CALL PAGING FRM BASE PAGING HANDSET PAGING M ENTER NUMBER ENTER NAME EMPTY STORING A NAME AND NUMBER IN MEMORY STORING A REDIAL NUMBER INSERTING A PAUSE IN THE DIALING SEQUENCE R EVIEWING , CHANGING OR DELETING STORED NAMES /N DELETE? **DELETED** DIALING A STORED NUMBER CHAIN DIALING FROM MEMORY The Number For Memory Location CALLER ID (CID) 11/24 9:58 RECEIVING AND STORING CID RECORDS NEW TRANSFERRING CID RECORDS TO MEMORY REPLACE MEMO? DIALING A CALLER ID NUMBER Number of digits Explanation Example DELETING THE CURRENT CALLER ID RECORD DELETE? NO CALLS DELETE ALL? **DELETED** A NSWERING S YSTEM S ET U VOICE INSTRUCTIONS A NSWERING S YSTEM O RECORDING THE OUTGOING ANNOUNCEMENT R EVIEWING A . LEAVING MESSAGE SCREENING CALLS FROM THE BASE MESSAGE PLAYBACK FROM BASE UNIT MEMORY FULL ERASING MESSAGES DELETE ALL MESSAGES R EMOTE A USING THE HANDSET ANSWERING SYSTEM INDICATOR ANSWERER OFF SCREENING CALLS FROM THE HANDSET MEMORY FULL ACCESSING THE ANSWERING SYSTEM FROM ANOTHER LOCATION REMOTE ACCESS ANSWERING CALL CHANGING THE SECURITY CODE CHANGING THE BATTERY BATTERY SAFETY PRECAUTIONS H EADSET AND B ELT C LIP O CONNECTING AN OPTIONAL HEADSET TO THE HANDSET CONNECTING THE BELT CLIP D ISPLAY M Page HANDSET SOUND SIGNALS Signal Meaning T ROUBLESHOOTING G TELEPHONE SOLUTIONS Page C ALLER ID S B ATTERY S G ENERAL P RODUCT C CAUSES OF POOR RECEPTION I A B C D L M P R S S A CCESSORY I Model 25880 00004228 (Rev. 0 E/S) 05-21 Printed in China LIMITED WARRANTY does not