GE 25880, 00004228 manual Dialing a Caller ID Number

If the memory location is occupied and, you want to replace it, you must confirm the replacement by pressing the memory/conference button on base or handset. REPLACE MEMO? shows in the display.

DIALING A CALLER ID NUMBER

When reviewing any call record in the Caller ID memory, you can dial back the caller’s number.

1.Make sure the phone is OFF (not in talk mode).

2.Press caller ID (rev or skip) button (on base) or caller ID/vol (- or +) button (on cordless handset) until the desired call record is displayed.

Depending on (a) how the incoming caller’s phone number is formatted when received, and (b) whether or not you pre-programmed your local area code into memory, you may need to adjust the format of the caller’s phone number before dialing it back.

The format button lets you change the format of the displayed number. Available formats include:

Number of digits		Explanation	Example
Eleven digits	long distance code “1”
	+ 3-digit area code
	+ 7-digit telephone number.		1-317-888-8888
Ten digits	3-digit area code +
	7-digit telephone number.		317-888-8888
Seven digits	7-digit telephone number.		888-8888

NOTE: If the phone company does not supply all ten digits of an incoming caller’s number, you will not be allowed to adjust the format of that number.

Scroll to the number you want to call back:

3.If using the base or handset: press the caller ID (rev or skip) button (on base) or caller ID/vol (- or +) button (on cordless handset).

32