4.Press the flash/prog button on the handset until LINK BASE? shows in the display. “NO” is the default setting.
5.Press caller ID/vol (- or +) button on the handset to scroll to YES.
6.Press flash/prog on the handset again to confirm.You will hear a long confirmation tone when the handset is successfully linked to the base.
DEFAULT SETTING
NOTE: This setting may be made with the base or the cordless handset.
1.Press the program/flash button on base or flash/prog button on handset until DEFAULT SETTING or DEFAULT shows in the display. “NO” is the default setting.
2.Use the
NOTE: If you choose “YES ” all settings in the programmable menu return to factory defaults except day and time.
3.Press the program/flash button on base or flash/prog button on handset again to store your selection.
BASIC OPERATION
ANSWERING A CALL
Check the display to see who is calling.
NOTE: You can only use one handset at a time. "UNAVAILABLE" will be displayed if other handset is in use.
CORDLESS HANDSET
1.Press the talk/end/call back button on the handset.
2.When finished, press talk/end/call back or place the handset in charging cradle to hang up.
CORDED HANDSET
1. Lift the handset.
17
