19
CALL TIMER
After you press talk/end/call back on the cordless handset (or lift the corded
handset, or press the speaker/call back button on the base), the built-in call
timer shows in the display and begins counting the length of time of the call.
AUTO STANDBY
Placing the cordless handset in the charge cradle while the handset is off
the hook (or during a call) automatically hangs up the handset.
RINGER VOLUME CONTROL
HANDSET
Use the two-position switch on the cordless handset to turn the ringer off
or on.
The ringer switch must be in the ON position for the cordless handset to
ring when incoming calls are received.
BASE UNIT
The base ringer volume is set through the programming menu. Refer to
Telephone Set Up for more information.
FLASH
Use the the program/flash button on base or flash/prog button on handset
to activate custom calling services such as call waiting or call transfer,
which are available through your local phone company.
TIP: Don’t use the talk/end/callback (handset) or speaker/call back (on base)
button to activate custom calling service such as call waiting, or you’ll hang up
the phone.
CALL TRANSFERTRANSFERRING CALL FROM BASE TO CORDLESS HANDSET
During an external call, you may transfer the external call from base to handset.
NOTE: To cancel the call transfer, you may press *exit button or page/intercom
button on base.