GE 55908580 manual Security Code, Ringer Level

SECURITY CODE

NOTE: This setting may only be made with the base.

You can access the answering system from a tone dialing telephone in another (remote) location. The security code is required for remote access, and it prevents unauthorized access to your answering system. You may only change the security code at the base.

1.Press the flash/program button until SECURITY CODE 1 2 3 shows in the display.

SECURITY CODE 1 2 3

2.Use the touch-tone pad to enter your new 3-digit security code. For example, press the 6, 2, and 8 number keys for security code 628. The default security code is 123.

NOTE: If you want to re-enter the security code, enter the numbers again and press the flash/program button. The new numbers replace the old numbers.

3.Press flash/program again to store your selection. You will hear a confirmation tone.

RINGER LEVEL

NOTE: This setting may only be made with the base.

1.Press the flash/program button until SET RING LEVEL >1HI 2LO 3OFF shows in the display. The default setting is 1HI.

SET RING LEVEL >1HI 2LO 3OFF

13