CALL WAITING CALLER ID
Provided you subscribe to Caller ID with Call Waiting service from your phone company, you may see who is calling when you hear the call waiting tone in the receiver. The CID information appears in the display after you hear the tone.
Press the flash/program button on base or the flash/prog button on the handset to put the current call on hold and answer the incoming call. Press flash/program button on base or flash/prog on handset again when you want to return to the first call.
IMPORTANT: In order to use all of the features of this unit, you must subscribe to either the standard Name/Number Caller ID Service or Call Waiting Caller ID Service. To know who is calling while you are on the phone, you must subscribe to Call Waiting Caller ID Service.
ANSWERING SYSTEM OPERATION
STANDBY DISPLAY
When the phone is not in use, the base displays the status of the answering system. The default setting status of the answering machine is on. If the answering system is turned off, then it displays ANSWERER OFF.
The answering system stores up to 59 messages or up to 15 minutes of messages (including the outgoing announcement). When the answering system’s memory is full, the display shows MEMORY FULL. Messages are limited to three minutes in length of incoming calls.
•Press the answerer on/off button to turn the answering system on and off. The display shows “ANSWERER OFF ” when the answering system is off. The default status is on. The new message indicator flashes when you have new messages.
31
