GE 55908580 Intercom Operation, Volume Answering System, Cordless Handset, Paging the Handset

VOLUME

ANSWERING SYSTEM

Adjust the base unit speaker volume by pressing the volume + and - buttons. There are eight volume levels, and each press of the volume button adjusts the speaker volume by one level. When you reach the maximum or minimum volume level, the phone beeps twice.

SPEAKERPHONE

Adjust the speakerphone volume by pressing the volume + and - buttons on the base.

CORDLESS HANDSET

While using the handset, Adjust the receiver volume by pressing the CID- VOL (- or + ) buttons. There are four volume levels, and each press of the CID-VOL (- or + ) buttons adjusts the receiver volume by one level. When the maximum or minimum volume level is reached, the phone beeps twice.

PAGING THE HANDSET

This feature helps you locate a misplaced handset. If you misplace your handset, press the page/int button on the base. The handset emits a continuous paging tone for 2 minutes to help you to find it. PAGING FRM BASE shows in the display. When you find the handset, press the talk/call back button on the handset or press the page button on the base again to stop the tone.

NOTE: You may still page the handset when the ringer is off.

INTERCOM OPERATION

The intercom feature allows you to have an unlimited-duration, two-way conversation between the base and handset.

MAKING AN INTERCOM CALL

1.Make sure the phone is OFF (not in talk mode).

2.Press the page/int button on the base. PAGING HANDSET show on the base display.

-OR -

21