GE 55909320 manual Ringer Tone, Tone/Pulse

1.Press the flash/program button until SET RING LEVEL >1HI 2LO 3OFF shows in the display. The default setting is 1HI.

SET RING LEVEL

>1HI 2LO 3OFF

2.Use the touch-tone pad to select 1, 2, or 3 or use the cid/messages (< or >) buttons to scroll to 1HI, 2LO, or 3OFF.

3.Press flash/program again to store your selection. You will hear a confirmation tone (at the base only).

NOTE: If you turn the ringer OFF, “RINGER OFF” shows in the base display.

RINGER TONE

NOTE: This setting may be made with the base and the handset.

You may choose from three different ringer tones.

1.Press the flash/program button until SET RINGER TONE > 1 2 3 shows on the base unit display or RINGER TONE > 1 shows on the handset display. The default ringer tone is 1.

SET RINGER TONE	RINGER TONE >1
> 1 2 3
Prompt displayed on the base unit	Prompt displayed on the handset

2.Use the touch-tone pad to select 1, 2, 3 or use the cid/messages (< or >) buttons on the base unit or CID/VOL ( < or > ) buttons on the handset to scroll to your selection. The ringer tone plays for few seconds.

3.Press flash/program again to store your selection. You will hear a confirmation tone.

TONE/PULSE

NOTE: This setting may only be made with the base.

14