GE 55909320 manual SET TIME 1200 AM PM, Set Time, Area Code

3.Press flash/program again to store your selection. You will hear a confirmation tone.

SET TIME

NOTE: This setting may only be made with the base.

NOTE: Time of day is automatically transmitted by your local phone company as part of Caller ID service. If you subscribe to Caller ID service, the current time is set automatically when you receive your first CID record. Otherwise, you may set the time manually.

NOTE: If you want to keep the current time, press the flash/program button

when the display shows - - : - - AM PM.

1.Press the flash/program button until SET TIME 12:00 >AM PM shows on the display. The default setting is 12:00 AM.

SET TIME

12:00 > AM PM

2.Use the touch-tone pad to enter the current time. In the display, the arrow automatically moves to the AM field. Use the cid/messages (< or >) button to move the arrow to PM, if necessary.

3.Press flash/program again to store your selection. You will hear a confirmation tone.

AREA CODE

NOTE: This setting may be made with the base and the handset.

If you enter a 3-digit area code here, your local area code does not appear in Caller ID messages you review. Instead, you will see only the local seven digit number. Calls you receive from outside your local area code display as the full ten-digit number.

1.Press the flash/program button until SET AREA CODE - - - shows on the base unit display or AREA CODE - - - shows on the handset display. The default setting is - - -.

16