GE 55909320 manual Dialing a Caller ID Number

1.Use the cid/messages ( < or > ) button (base) or CID/VOL ( < or > ) button (cordless handset) to scroll to the desired record.

2.Press the memory (base) or conf./memory (handset) button.

3.Press the desired memory location. For example, press the number 1 key to store the record in memory location 1. If memory location 1 is occupied, and you want to replace it, you must confirm the replacement by pressing the memory button on the base or the conf./memory button on the handset. REPLACE MEMO? shows in the display.

DIALING A CALLER ID NUMBER

When reviewing any call record in the Caller ID memory, you can dial back the caller’s number.

1.Make sure the phone is OFF (not in talk mode).

2.Press cid/messages ( < or > ) button (base) or CID/VOL ( < or > ) button (cordless handset) until the desired call record is displayed.

Depending on (a) how the incoming caller’s phone number is formatted when received, and (b) whether or not you pre-programmed your local area code into memory, you may need to adjust the format of the caller’s phone number before dialing it back.

The format button lets you change the format of the displayed number.

Available formats include:

Number of digits	Explanation	Example
Eleven digits	long distance code “1”
	+ 3-digit area code
	+ 7-digit telephone number.	1-317-888-8888
Ten digits	3-digit area code +
	7-digit telephone number.	317-888-8888
Seven digits	7-digit telephone number.	888-8888

31