GE 55909320 manual Storing a Redial Number, Inserting a Pause in the Dialing Sequence

6.Use the touch-tone pad to enter the area code followed by the telephone number (up to 24 digits, including pauses) and press the memory or conf./ memory button again to save your selection.The unit beeps to confirm.

7.To enter another name and number in a different memory location, return to step 1 and repeat the process.

STORING A REDIAL NUMBER

1.Make sure the phone is OFF (not in TALK mode).

2.Press the memory button on the base or conf./memory button on the handset.

3.Use the cid/messages (< or >) buttons on the base or CID/VOL (< or >) buttons on the handset to select the memory location or press any number key (0-9) to store the phone number in that memory location.

4.Press memory or conf./memory and ENTER NAME shows in the display.

5.Use the base or cordless handset touch-tone pad to enter the name, then press memory or conf./memory. ENTER NUMBR shows in the display.

6.Press redial to display the redial number and name.

7.Press memory or conf./memory again to confirm.

NOTE : If the number you want to redial has more than 24 digits, the telephone number cannot be stored in memory.

INSERTING A PAUSE IN THE DIALING SEQUENCE

Press the #PAUSE button on the touch-tone pad to insert a delay in the dialing sequence of a stored telephone number when a pause is needed to wait for a dial tone (for example, after you dial 9 for an outside line, or wait for a computer access tone.)The waiting time for a pause is approximately 3 seconds and each pause counts as 1 digit in the dialing sequence.

REVIEWING, CHANGING OR DELETING STORED NAMES/NUMBERS

To Review: Press memory on the base or conf./memory on the handset, then press the cid/message ( < or > ) button on the base or the CID/VOL ( < or > ) button on the handset to scroll through the stored numbers. Or press the memory location number.

26