GE 55909320 manual Set Area Code, DEFAULt SETTING, 1YES 2NO, Area Code ‐ ‐ ‐, DEFAULt NO

SET AREA CODE	AREA CODE ‐ ‐ ‐
‐ ‐ ‐
Prompt displayed on the base unit	Prompt displayed on the handset

2. Use the touch-tone pad to enter your three digit area code.

NOTE: If you make a mistake, press the delete/erase button on the base or the chan/delete button on the handset to erase the incorrect area code and repeat above step.

3.Press flash/program again to store your selection.You will hear a confirmation tone.

FACTORY DEFAULT

NOTE: This setting may be made with the base and the handset.

As you become familiar with this system, you may prefer to use the system’s original settings. Follow these steps to return to the factory settings.

1.Press the flash/program button until DEFAULT SETTING 1YES >2NO shows on the base unit display or DEFAULT > NO shows on the handset display. The default setting is NO.

DEFAULt SETTING	DEFAULt > NO
1YES > 2NO
Prompt displayed on the base unit	Prompt displayed on the handset

2.Use the touch-tone pad to select 1YES or 2NO, or press the cid/ messages (< or >) button on the base or CID/VOL (< or >) button on the handset to scroll to YES or NO.

•If you select YES, all settings in the programmable menu return to the factory default settings.

•If you select NO, your programmed settings are retained.

17