GE Adora 29, Profile 26 and 29 About the control with temperature settings for non-LCDmodels, Model, Model, GE Adora, Changing the Temperature, Each time you adjust controls, allow, SET

About the control with temperature settings for non-LCD models.

Model 26GE Adora 29

Model 29

ENERGY	TURBO FREEZE	TURBO COOL	ALARM/
SAVER			LIGHT
			Light ON/OFF
			(Hold 3 seconds)
	CLIMATE KEEPER
ADJUST		˚F	ADJUST
FREEZER	˚F		REFRIGERATOR
(Hold 3 sec	-2˚ F Recommended	38˚ F Recommended	(Hold 3 sec
for Turbo Freeze)			for Turbo Cool)
		ICE
		OFF
ICE &			ICE OFF/
WATER	RESET FILTER CUBED CRUSHED WATER		LOCK
(Hold 3 sec			(Hold 3 sec
to Reset Filter)			to Lock Control)

NOTE: The refrigerator is shipped with protective film covering the temperature controls. If this film was not removed during installation, remove it now.

The temperature controls are preset in the factory at 38°F for the refrigerator compartment and -2°Ffor

the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended settings.

The temperature controls can display both the SET temperature as well as the actual temperature in the refrigerator and freezer. The actual temperature may vary slightly from the SET temperature based on usage and operating environment.

ADJUST

REFRIGERATOR

(Hold 3 sec

for Turbo Cool)

ADJUST

FREEZER

(Hold 3 sec

for Turbo Freeze)

Changing the Temperature

To change the temperature, press and release the ADJUST FREEZER or ADJUST REFRIGERATOR pad. The display will show the actual temperature. To change the temperature, tap either the ADJUST FREEZER or ADJUST REFRIGERATOR pad until the desired temperature is displayed.

Once the desired temperature has been set, the temperature display will return to the actual refrigerator and freezer temperatures after 10 seconds. Several adjustments may be required.

Each time you adjust controls, allow

24 hours for the refrigerator to reach the temperature you have set.

12