Installation

Refrigerator

Instructions

Profile Models 26, 29

Questions? Call 800.GE.CARES (800.432.2737) or visit our Website at: GEAppliances.com In Canada, call 1.800.561.3344 or visit our Website at: www.GEAppliances.ca

BEFORE YOU BEGINRead these instructions completely and carefully.
TOOLS YOU MAY NEED

IMPORTANT Save these instructions for local

inspector’s use.

IMPORTANT Observe all governing codes and

ordinances.

• Note to Installer – Be sure to leave these instructions with

the Consumer.

Adjustable Wrench

10 mm Socket Ratchet/Driver

• Note to Consumer – Keep these instructions for future

reference.

• Skill level – Installation of this appliance requires basic

mechanical skills.

• Completion time – Refrigerator Installation 20 minutes

Water Line Installation 30 minutes

Proper installation is the responsibility of the installer.

Product failure due to improper installation is not covered

under the Warranty.
PREPARATIONMOVING THE REFRIGERATOR INDOORSIf the refrigerator will not fit through a doorway,the refrigerator door and freezer drawer can be removed.To remove the refrigerator door, see the Installing the Refrigerator section.To remove the freezer drawer, see the Removing the Freezer Drawer section.WATER SUPPLY TO THE ICEMAKER AND DISPENSER

If the refrigerator has an icemaker, it will have to be connected to a cold water line. A GE water supply kit (containing tubing, shutoff valve, fittings and instructions) is available at extra cost from your dealer, by visiting our Website at GEAppliances.com (in Canada at www.GEAppliances.ca) or from Parts and Accessories, 800.626.2002 (in Canada 1.800.661.1616).

1/4Outer Diameter

 

Compression Nut

Phillips-Head Screwdriver

and Ferrule (sleeve)

 

Flat-Head Screwdriver

3/32, 1/8and 4 mm

Allen Wrenches

1/8Drill Bit and

Tape Measure

Electric or Hand Drill

 

Pencil

1/4Nut Driver

 

Pliers

Level

24