Installation Instructions

INSTALLING THE REFRIGERATOR

16LEVEL THE FREEZER DOOR

ALocate the height adjuster in the freezer door. Slightly loosen the four Phillips-head screws from the door on each side (right and left).

BLoosen the controller screw with a Phillips- head screwdriver to adjust the level.

(cont.)

16LEVEL THE FREEZER DOOR (cont.)CFind the best position to align the door slope.

Example: The slope is about 2 mm as shown below.

Slope

Reference

Rotate the height adjuster to +2.0 to reduce

Plane

the door slope.

DAfter adjustment, tighten all the screws.17SET THE CONTROLSSet the controls to the recommended setting.
18REMOVE PACKAGING

A)Remove all tape, foam and protective packing from shelves and drawers.

34