GE Adora 29, Profile 26 and 29 10REPLACING THE FREEZER DOOR (cont.), NOTES:, REPLACE THE FREEZER BIN, Installing the Water Line, REPLACE THE FREEZER BASKET, If you are using copper tubing

Installation Instructions

INSTALLING THE REFRIGERATOR

10REPLACING THE FREEZER DOOR (cont.)

CTighten screws completely. (There are four 10 mm hex-head bolts.)REPLACE THE FREEZER BASKETReplace the freezer basket by lowering it into the frame.REPLACE THE FREEZER BIN

Hook the ends of the freezer bin into both brackets, and push down until they lock into place. (See page 19.)

(cont.)

11CONNECTING THE REFRIGERATOR TO THE HOUSE WATER LINE

A cold water supply is required for automatic icemaker operation. If there is not a cold water supply, you will need to provide one. See Installing the Water Line section.

NOTES:

•Before making the connection to the refrigerator, be sure the refrigerator power cord is not plugged into the wall outlet.

•If your refrigerator does not have a water filter, we recommend installing one if your water supply has sand or particles that could clog the screen of the refrigerator’s water valve. Install it in the water line near the refrigerator. If using GE SmartConnect™ Refrigerator Tubing Kit, you will need an additional tube (WX08X10002) to connect the filter. Do not cut plastic tube to install filter.

AIf you are using copper tubing, place a compression nut and ferrule (sleeve) onto the end of the tubing coming from the house cold water supply.

If you are using the GE SmartConnect™ tubing, the nuts are already assembled to the tubing.

BIf you are using copper tubing, insert the end of the tubing into the refrigerator connection, at the back of the refrigerator, as far as possible. While holding the tubing, tighten the fitting.

If you are using GE SmartConnect™ tubing, insert the molded end of the tubing into the refrigerator connection, at the back of the refrigerator, and tighten the compression nut until it is hand tight. Then tighten one additional turn with a wrench. Overtightening may cause leaks.

CFasten the tubing into the clamp provided to hold it in position. You may need to pry open the clamp.

Ferrule	1/4”
(sleeve)	Compression
Refrigerator	Nut
Connection
SmartConnect™
Tubing

32