GE Adora 29, Profile 26 and 29 5REMOVE THE REFRIGERATOR DOORS, 6REPLACING THE REFRIGERATOR DOORS, 5REMOVE THE REFRIGERATOR DOORS (cont.), CAUTION:, INSTALLING THE REFRIGERATOR

Installation Instructions

INSTALLING THE REFRIGERATOR

5REMOVE THE REFRIGERATOR DOORS

AOpen the refrigerator doors.BRemove the two front caps with a flat-head screwdriver.CRemove the three screws on top with a Phillips-head screwdriver.DDisconnect all electrical connectors.

ETo disconnect the water coupling, push in on the gray coupling and pull out the tubing.

Gray

Coupling

FRemove the two ground wires with a Phillips-head screwdriver, one on each side.GRemove three 10 mm hex-head bolts (right and left).

Ground

Wire

CAUTION: When the bolts are removed, the door may fall and cause personal injury and/or damage to the door itself.

(cont.)

5REMOVE THE REFRIGERATOR DOORS (cont.)

HLift the door straight up to remove.

IRemove the two bolts using a 3/16” Allen wrench and two Phillips-head screws from the center hinge. Set the hinge, bolts and screw aside.

6REPLACING THE REFRIGERATOR DOORS

AInstall the center hinge on each side.

BLower the refrigerator door onto the center hinge pin. Ensure that the plastic hinge pin thimble is on the center hinge pin or inside door hinge pin hole located in the bottom of the door.

CSecurely tape the door shut with masking tape or have a second person support the door.

28