GE Adora 29, Profile 26 and 29 8REMOVING THE LEVELING LEGS (if applicable), 8REMOVING THE LEVELING LEGS (if applicable) (cont.), 9REPLACING THE LEVELING LEGS (if applicable), (cont.), door

Installation Instructions

INSTALLING THE REFRIGERATOR

7REMOVE THE FREEZER DOOR (cont.)

EUse the tip of a screwdriver to separate the rail from the rail cover. Tilt the front end up and lift the entire

door.

F

GSet the door front on a nonscratching surface. Push the rail assemblies back into the cabinet.

CAUTION:Push both sides of the rail assemblies back at the same time.

8REMOVING THE LEVELING LEGS (if applicable)

26-cu.-ft. models

Remove the 2 bolts securing the leveling leg bracket to the front of the refrigerator cabinet. Do this on both sides.

(cont.)

8REMOVING THE LEVELING LEGS (if applicable) (cont.)

29-cu.-ft. modelsTwo people are required to complete this procedure.AGently lean the refrigerator back so the front end is off of the floor.

BRemove the 2 bolts securing the leveling leg bracket to the underside of the refrigerator cabinet. Do this on both sides.

9REPLACING THE LEVELING LEGS (if applicable)

26-cu.-ft. models

Replace the 2 bolts to secure the leveling leg bracket to the front of the refrigerator cabinet. Do this on both sides.

30