10.2Setting up the ProBridge for HyperTerminal Operation
1.Start HyperTerminal and open a new Connection (FILE>NEW):
Give the connection a name and select an Icon.
Click OK.
2.Under “Connect Using” option select “COM1”.
3.The Com1 Properties menu will appear. Select the following settings to complete the setup:
a.Bits per Second = 19200
b.Data Bits = 8
c.Parity = None
d.Stop Bits = 1
e.Flow Control = None
4.Power up the ProBridge unit by plugging in the power supply.
Kalatel | 27 |
