GE CBR-PB3-WD Setup Option 2 Port #2, a. Menu Selection 2 - Protocol Options q Asynchronous

3.Setup Option 2 (Port #2)

Port #2 is an RS-232 port that connects the PB3 unit to the Receipt Printer Interconnect Cable. The settings will vary based upon the type of Receipt Printer in use.

Once you have selected this option, there will be multiple selections available for each element. Entering the number for the element will switch to the next option for that element. Continue to enter the same element number until the desired entry appears.

The menu options are presented similar to the following screen:

RS-232 Options

1.Main Menu

2.Protocol: Async

3.Baud Rate: 9600

4.Parity: None

5.Mode: 1-stop

6.Code: 8-Bit ASCII

7.Device: Wayne Dresler

NOTE

To return to the Main Menu at any time press “1” and hit “Enter”

a.Menu Selection 2 – Protocol Options q Asynchronous

Kalatel CBR-PB3-WD 29 0150-0261A