GE CBR-PB3-WD installation manual Final Testing

NOTE

gender changer is added to match the DB9M connector needed for the port on the DVMRe-CD/CS.

ii.Modem must be configured for Port 1. The menu setup is: Communications>RS-232>Port 1> POTS.

iii.The unit will have to be opened and a specific jumper setting set to allow text insertion on RS-232/2 Port. Contact Kalatel Tech Support for instructions on configuring the PORT 2 for text insertion.

Transaction text is captured with video regardless of recording mode (Time-Lapse, Time-Lapse+Event or Event only). If Time- Lapse+Event or Event only recording modes must have at least one second set for the pre-event duration.

Final Testing

After hooking up the Duplex or Simplex unit, have some POS transactions generated. Allow sufficient time (2-3 minutes) before stopping recording and performing a text search from the DVMRe-CD/CS unit. Search for events based upon text and place a “*” in the text field and then select “Start Search”. All captured Cash Register transactions will be displayed in the list.

Kalatel CBR-PB3-WD 32 0150-0261A