Note

For system lights to respond to basic and advanced light commands, the light switches must be turned on.

3.At any touchpad, press # + CODE (# is labeled Bypass)

4.Touchpads display, “BYPASS SENSOR _ _,” or “ENTER SNSR _ _.” Enter the desired sen- sor number.

5.Touchpads display, “BYPASSED ZONES 01,” or “SENSOR 01 BYPASSED,” for example.

6.If the touchpad displays “INVALID,” or “FAILURE,” or if the touchpad sounds one long beep, make sure that you entered a valid sensor number. Smoke/heat sensors cannot be bypassed.

7.Bypass other sensors if desired, by repeating Step 3.

8.The bypassed doors or windows can now be opened.

To arm (unbypass) bypassed sensors:

1.Repeat the above procedure substituting the bypassed sensor number or,

2.Close bypassed doors and/or windows and arm your system again.

Bypassing a Sensor Indirectly

Use this method if you are arming the system and would like to bypass doors and windows already open.

To bypass sensors indirectly:

1.Leave open only those doors and windows that are to remain open. Close all others.

2.Arm your system to the desired level. The touchpad emits protest beeps and displays “PRO- TEST,” because of the open sensor(s).

3.At any touchpad press # (Bypass). Touchpads with displays show, “BYPASSED ZONES 01,” or “SENSOR 01 BYPASSED,” for example.

4.The system sounds arming level beeps to indicate that the system is armed and open sensors have been successfully bypassed.

To arm (unbypass) bypassed sensors:

1.Close bypassed doors and/or windows.

2.Arm your system again.

To bypass sensors indirectly using a keychain touchpad:

1.Press the button once to arm the system and again to bypass open sensors.

Was the Bypass Successful?

To confirm whether or not a sensor was bypassed:

1.Press the Status button on the touchpad. (* is labeled Status.) Touchpads list bypassed sensors or zones.

Basic Light Control

There are two kinds of light control:

Basic light control, offering instant light control at any touchpad, and

Advanced light control, in which lights turn on and off automatically according to specific sit- uations. (See “Advanced Light Control”).

To turn all lights on or off:

1.From any touchpad: Press 0 + 0.

From a 4-button keychain touchpad: Press the Lights button.

To turn a specific light on or off*:

1.From any touchpad: Press 0 + light number.

From a 4-button keychain touchpad:

You cannot turn on a specific light using a keychain touchpad.

10

Concord 4 Series Security Systems

Page 20
Image 20
GE Concord 4 manual Basic Light Control, Bypassing a Sensor Indirectly, Was the Bypass Successful?

Concord 4 specifications

The GE Concord 4 is a cutting-edge gas turbine designed to meet the growing energy demands of the modern world while maximizing efficiency and reducing environmental impact. It is part of GE's renowned family of gas turbines, which have consistently set benchmarks for performance and reliability across various industries.

One of the standout features of the Concord 4 is its efficiency. With a thermal efficiency rate exceeding 60%, it represents a significant advancement in power generation technology. This high efficiency is achieved through advanced aerodynamics in the turbine blades, optimized combustion processes, and state-of-the-art materials that withstand extreme temperatures and pressures. As a result, operators can expect lower fuel consumption and reduced emissions, ultimately contributing to a cleaner environment.

The Concord 4 utilizes advanced combustor technology that supports a wide range of fuels, including natural gas, biogas, and liquid fuels. This flexibility ensures that operators can adapt to changing market conditions and regulatory environments while maintaining operational efficiency. Furthermore, the turbine's low emissions profile is a critical advantage in today's environmentally conscious landscape, allowing plants to comply with stringent regulatory standards.

Another key characteristic of the GE Concord 4 is its modular design, which simplifies maintenance and reduces downtime. The turbine's key components can be accessed and serviced efficiently, ensuring that power plants can operate continuously without significant interruptions. This design philosophy extends to the overall lifecycle of the turbine, as longer intervals between maintenance contribute to lower operating costs.

The Concord 4 is equipped with advanced digital technologies that enhance performance monitoring and predictive maintenance capabilities. Smart sensors and analytics tools provide real-time data on the turbine’s performance, enabling operators to make informed decisions and optimize operations. This digital integration not only improves reliability but also helps in planning maintenance activities more effectively, reducing operational risks.

In summary, the GE Concord 4 gas turbine stands out for its exceptional efficiency, fuel flexibility, and innovative design. Enhanced by digital technologies, it delivers powerful performance while minimizing environmental impact. This combination of features makes it an ideal choice for energy producers looking to meet both economic and environmental goals in an increasingly competitive market. With the Concord 4, GE continues its legacy of engineering excellence in the field of power generation.